Part numbers 00MA20-SLT to L 886205-001. Click any part to check it in our catalog and request a quote — prices aren't published online; our sales team quotes each request. This is Liqua-Tech's full part-number index, not a live stock list — ask us to confirm availability and lead time on any item.
| Part number | Description |
|---|---|
| 00MA20-SLT | Quick Vent, ¾” & 1” |
| 00MA98-SLT | Quick Vent, 2” |
| 1000624 | Order L 083771-003 |
| L 000010-C01 | Bushing, Gear Plate |
| L 000034-000 | Clamp nut, gear train, standard |
| L 000034-004 | Clamp nut, gear train, steel, NH3 |
| L 000795-003 | Screw, plated, 7/16"-14 x 1-3/8" |
| L 000795-011 | Screw, plated, 7/16" NC x 1-3/8", drilled |
| L 000796-004 | Washer, anc 7/16", stainless steel |
| L 001054-000 | .670 change gear, 24T, Type A |
| L 001056-000 | .670 change gear, 25T, Type A |
| L 001059-000 | .670 change gear, 27T, Type A |
| L 001061-000 | .670 change gear, 28T, Type A |
| L 001063-000 | .670 change gear, 29T, Type A |
| L 001064-000 | .670 change gear, 30T, Type A |
| L 001065-000 | .670 change gear, 31T, Type A |
| L 001066-000 | .670 change gear, 32T, Type A |
| L 001069-000 | .670 change gear, 33T, Type A |
| L 002797-020 | Vapor Return Gasket, Ck Valve, 1 1/4-2 in. |
| L 002857-003 | Dowel stud, seal pin, (Neptune) 2'' measuring chamber |
| L 002857-010 | Dowel stud, seal pin, (LTC) 2" measuring chamber |
| L 003165-000 | Rego Vent Valve |
| L 003259-000 | .685 change gear, 18T, Type A |
| L 003267-000 | .685 change gear, 19T, Type A |
| L 003273-000 | .685 change gear, 20T, Type A |
| L 003279-000 | .685 change gear, 21T, Type A |
| L 003285-000 | .670 change gear, 22T, Type A |
| L 003293-000 | .670 change gear, 23T, Type A |
| L 003303-000 | .670 change gear, 26T, Type A |
| L 003319-000 | .670 change gear, 34T, Type A |
| L 003325-000 | .670 change gear, 35T, Type A |
| L 003331-000 | .670 change gear, 36T, Type A |
| L 004861-016 | Main case gasket, 3/4" LPM |
| L 004862-008 | Main case gasket, 1½" LPM |
| L 008302-107 | Screw, fillister head, 1/4"-20 x 2½" |
| L 008325-013 | Screw, socket head, 5/16"-18 x 5/8", stainless steel |
| L 008325-014 | Screw, socket head, 3/8"-16 x 1", plated |
| L 008325-015 | Screw, socket head, 3/8"-16 x 1", drilled |
| L 008325-016 | Screw, socket head, 5/16-18 x 2 1/4" plated |
| L 008325-020 | Screw, socket head, 1/4"-20 x 1/2", stainless steel |
| L 008325-101 | Screw, socket cap (mounting board screw) |
| L 008325-401 | Screw, socket head, 1/4"-20 x 3/4" |
| L 008355-506 | Spring, offset spider, 3/4", 1" ATC |
| L 008571-014 | Washer, .349 x .192 x .025, stainless steel |
| L 008989-010 | Screw, slot fillister, 3-48 x 3/8", 304 stainless steel |
| L 009287-003 | Screw, cover, 10-32 x 3/4", special, drilled |
| L 040237-004 | Screw, 7/16" NC x 1¼", plated |
| L 040237-005 | Screw, 7/16" NC x 1¼", drilled |
| L 040491-000 | Washer, float lever pin (long), A/R valve |
| L 040819-002 | Rivet, valve lever, A/R valve |
| L 040820-003 | Pin, Float Lever (Long) A/R Valve |
| L 041012-002 | Lock washer, plated, 7/16", split, medium |
| L 041117-000 | Lock washer, plated, 1/4", split |
| L 041150-000 | Lock washer, 5/8" steel |
| L 041150-002 | Flat washer, 5/8" steel |
| L 041211-000 | Lock washer, #10 steel |
| L 041221-002 | Screw, fillister head, 10-32 x 5/8", steel |
| L 041226-000 | Nut, 5/8-11, hex |
| L 041401-000 | Cotter pin, 1/16" x 3/8", stainless steel |
| L 041402-000 | Cotter pin, 1/16" x 1/2", stainless steel |
| L 041403-000 | Cotter pin, 1/16" x 1", stainless steel |
| L 041692-006 | Rivet, #0 x 1/4", U-drive |
| L 041750-000 | Screw, fillister head, 10-32 x 3/4", stainless steel |
| L 041750-002 | Screw, fillister head, 10-32 x 3/4", drilled, stainless steel |
| L 041750-008 | Screw, 10-32 x 3/8”, socket buttonhead, stainless steel |
| L 041750-010 | Screw, 10-32 X 1/2", buttonhead, stainless steel |
| L 041989-000 | Washer, float lever pin (short) |
| L 042075-101 | Measuring chamber, 3/4", 1", Type 4D (LPG) |
| L 042075-501 | Measuring chamber 3/4", 1", w/Trac-Bearing roller |
| L 042075-502 | Measuring chamber 3/4", 1" measuring chamber, low flow, Trac |
| L 042075-702 | Measuring chamber 3/4", (Neptune) repair kit |
| L 042075-710 | Measuring chamber 3/4", (LTC) repair kit |
| L 042075-CHG | Trac-Bearing charge, 3/4" & 1" |
| L 042080-003 | Piston assembly, ¾”, LPG |
| L 042086-000 | Control roller (Neptune) 3/4" measuring chamber |
| L 042086-010 | Control roller (LTC) 3/4" measuring chamber |
| L 042312-001 | Diaphragm, (Neptune) 2" measuring chamber |
| L 042312-005 | Diaphragm, (Neptune) 2" measuring chamber NH3 |
| L 042312-010 | Diaphragm, (LTC) 2" measuring chamber |
| L 042312-015 | Diaphragm, (LTC) 2" measuring chamber NH3 |
| L 042313-001 | Piston assembly, 2”, LPG/RF/NH3 |
| L 042313-010 | Order L 042313-001 |
| L 042316-001 | Control roller (Neptune) 2" measuring chamber |
| L 042316-004 | Control roller (Neptune) 2" measuring chamber NH3 |
| L 042316-010 | Control roller (LTC) 2" measuring chamber |
| L 042316-014 | Control roller (LTC) 2" measuring chamber NH3 |
| L 042546-000 | Seal pin, (Neptune) 2" measuring chamber |
| L 042546-002 | Seal pin, (Neptune) 2" measuring chamber, NH3 |
| L 042546-010 | Seal pin, (LTC) 2" measuring chamber |
| L 042546-012 | Seal pin, (LTC) 2" measuring chamber, NH3 |
| L 042791-000 | Diaphragm-75 all 3/4" measuring chamber |
| L 042792-000 | Seal pin, w/slot 3/4"- 1½" measuring chamber |
| L 042792-003 | Seal pin, w/slot (LTC) 1½" measuring Chamber, NH3 |
| L 042941-000 | Valve stem pin, main valve |
| L 042941-001 | Valve stem pin, main valve, NH3 |
| L 043260-101 | Measuring chamber, 1¼", Types 4 & 4D |
| L 043260-102 | Measuring chamber, 1¼", special service |
| L 043260-501 | Measuring chamber, 1¼", Trac-Bearing |
| L 043260-702 | Measuring chamber, 1¼", (Neptune) repair kit |
| L 043260-710 | Measuring chamber, 1¼", (LTC) repair kit |
| L 043271-000 | Diaphragm, all 1¼" measuring chambers |
| L 043272-000 | Piston, 1¼" measuring chambers |
| L 043272-001 | Piston, bronze, 1¼" measuring chambers |
| L 043272-003 | Piston, 1¼" measuring chambers, NH3 |
| L 043275-000 | Control roller (Neptune), 1¼", 1½" measuring chamber |
| L 043275-004 | Control roller (Neptune), 1½" measuring chamber, NH3 |
| L 043275-010 | Control roller (LTC), 1½", measuring chamber |
| L 043275-014 | Control roller (LTC), 1½", measuring chamber, NH3 |
| L 043280-CHG | Trac-Bearing charge, 1 1/4" & 1 1/2" |
| L 045806-101 | Measuring chamber, 2" Types 4,4D,&4E |
| L 045806-103 | Measuring chamber, 2" Type 4D Style A, NH3 |
| L 045806-501 | Measuring chamber, 2" w/Trac-Bearing roller |
| L 045806-701 | Measuring chamber, 2" Neptune, repair kit |
| L 045806-702 | Measuring chamber, 2" LTC, repair kit |
| L 045806-CHG | Trac-Bearing charge, 2” |
| L 050351-002 | Screw, 8/32" x 5/16" slot fillister, stainless steel |
| L 080002-000 | Link assembly, adjustable, 2" lower valve housing |
| L 080002-002 | Link assembly, 2" A/R valve, fixed lower housing, steel |
| L 080605-000 | Register, Neptune 157 1 US gallon |
| L 080605-001 | Register, Neptune 157, 1 liter |
| L 080605-006 | Register, Neptune 157, 10 liters - |
| L 080862-001 | Gear train, LPM-200 1:1 ratio |
| L 080862-050 | Gear train, 3.75 ratio, refined fuels, 1 US gallon |
| L 080862-051 | Gear train, 4.58 ratio, LPG, Imperial gallon |
| L 080862-055 | Gear train, 9.93 ratio, LPG, liters |
| L 080862-057 | Gear train, 9.93 ratio, LPG, liters, clover drive |
| L 080890-010 | Order L 080905-010 |
| L 080905-000 | Gear train, 174 ratio (Neptune 106), LPG, US gallons, split spindle, 3/4" |
| L 080905-001 | Gear train, 43.5 ratio, LPG, 1 US gallon, split spindle, 1" |
| L 080905-006 | Gear train, 116.875 ratio, LPG, 10 liters, split spindle, 1" |
| L 080905-010 | Gear train, 1” meters, 10.875 ratio, 1 quart |
| L 080905-011 | Gear train, 11.6 ratio, LPG, 1 liter, split spindle, 1" |
| L 080905-012 | Gear train, 174 ratio, (Neptune 600), LPG, 4 US gallons, standard spindle, 3/4" |
| L 080905-013 | Gear train, 116.875 ratio, LPG, 10 liter, standard spindle, 1" |
| L 080905-015 | Gear train, 11.6 ratio, LPG, 1 liter, standard spindle, 1" |
| L 080905-016 | Gear train, 10.125 ratio, LPG, 1 liter, standard spindle |
| L 080905-017 | Gear train, 43.5 ratio, LPG, 1 US gallon, standard spindle, 1" |
| L 080905-020 | Gear train, 5.4375 ratio, 3/4", 1", LPG, 1 pint |
| L 080905-050 | Gear train, 10.125 ratio, LPG, liters |
| L 080905-100 | Gear train, 1:1 ratio, special |
| L 081230-018 | Change gear, 18T .770 diameter |
| L 081230-019 | Change gear, 19T .770 diameter |
| L 081230-020 | Change gear, 20T .770 diameter |
| L 081230-021 | Change gear, 21T .770 diameter |
| L 081230-022 | Change gear, 22T .770 diameter |
| L 081230-023 | Change gear, 23T .770 diameter |
| L 081230-024 | Change gear, 24T .770 diameter |
| L 081230-025 | Change gear, 25T .770 diameter |
| L 081230-026 | Change gear, 26T .770 diameter |
| L 081230-027 | Change gear, 27T .770 diameter |
| L 081230-028 | Change gear, 28T .770 diameter |
| L 081230-029 | Change gear, 29T .770 diameter |
| L 081230-030 | Change gear, 30T .770 diameter |
| L 081230-031 | Change gear, 31T .770 diameter |
| L 081230-032 | Change gear, 32T .770 diameter |
| L 081230-033 | Change gear, 33T .770 diameter |
| L 081230-034 | Change gear, 34T .770 diameter |
| L 081230-035 | Change gear, 35T .770 diameter |
| L 081230-036 | Change gear, 36T .770 diameter |
| L 081235-106 | Change gear key (106) .017 thick |
| L 081235-600 | Shear leaf/Change gear key (600) .025 thick |
| L 082060-000 | Oval flange gasket, 1½" |
| L 082446-005 | Sleeve, air release (aluminum) |
| L 082455-000 | Valve housing w/extensions, 1½" AR valve (no red metal) |
| L 082455-005 | Valve housing w/extensions, 1½" AR valve |
| L 082462-000 | Order L 080002-002 |
| L 082469-002 | O-ring, 1½" & 2” vapor release, NH3 |
| L 082470-002 | O-ring, 1½" C.V. soft seat, NH3 |
| L 082476-001 | Float complete, 1¼", 2" vapor return |
| L 082476-050 | Float complete, 1¼", 2", (refined fuel) |
| L 082516-005 | U-cup seal (gear train) neoprene |
| L 082633-000 | Pin, float lever (short), A/R valve, LPG & NH3 |
| L 082678-000 | Stud, 5/8”-11 x 2¼" |
| L 082694-003 | O-ring, 2” check valve flange, NH3 |
| L 082710-054 | Gear train, 36.41 ratio, LPG, 1 liter, 1¼" |
| L 082886-000 | Gear train, 13.29 ratio, industrial, 1 lb., enclosed, 400 1" Trident |
| L 082976-001 | Star drive, (157 hole) w/set screw |
| L 083127-001 | Valve stem, main valve A/R, (bronze) |
| L 083127-002 | Valve stem, main valve, steel |
| L 083179-000 | Piston seal, 1½", 2", vapor eliminator (Buna-N) |
| L 083179-001 | Piston seal, 1½", vapor eliminator (neoprene) |
| L 083179-002 | Piston seal, 1½", 2", vapor eliminator (Viton) |
| L 083271-101 | Measuring chamber, 1½", 4 & 4D |
| L 083271-102 | Measruing chamber, 1½", special service |
| L 083271-103 | Measuring chamber, 1½", 4D Style A, NH3 |
| L 083271-501 | Measuring chamber, 1 1/2", trac roller |
| L 083271-702 | Measuring chamber, 1½", Neptune repair kit |
| L 083271-710 | Measuring chamber, 1½", LTC repair kit |
| L 083277-000 | Diaphragm, 1½" measuring chamber |
| L 083277-005 | Diaphragm, 1½" measuring chamber, NH3 |
| L 083278-001 | Piston, 1½”, LPG |
| L 083278-003 | Piston, 1½”, bronze |
| L 083278-004 | Piston, 1½”, NH3 |
| L 083278-050 | Gear train, 9.648 ratio, refined fuel, 1 US gallon, 1½" |
| L 083280-052 | Gear train, 25.4184 ratio, LPG, 1 liter, 1½" |
| L 083421-004 | O-ring, 1½" differential valve (neoprene) |
| L 083441-000 | Collar ring, retaining |
| L 083442-000 | Flathead screw 6-32 x 1/2", stainless steel, slotted |
| L 083457-000 | Valve housing with extensions, 2" |
| L 083479-701 | Main Case Cover only, 1 1/4", 1 1/2" |
| L 083481-701 | Mounting cover w/float valve, 1¼", 1½" |
| L 083485-702 | Strainer Cover only, 1½” |
| L 083492-000 | Spring, 1½" check valve, (bronze) |
| L 083492-010 | Spring, 2" check valve, stainless steel |
| L 083493-003 | Strap, center bearing support |
| L 083501-000 | Gear train, 14.06 ratio, LPG, 1 US gallon, 1", 1¼" |
| L 083502-000 | Gear train, 3.75 ratio, clover driver 1 US Gallon |
| L 083502-005 | Gear train, 3.75 ratio, tear drop 1 US Gallon |
| L 083536-000 | Nut, stuffing box, complete, w/bushing |
| L 083536-003 | Nut, stuffing box, complete, steel bushing, NH3 |
| L 083539-000 | U-cup expander |
| L 083539-001 | U-cup expander, steel |
| L 083540-000 | Spring, stuffing box |
| L 083732-000 | Cover, thermowell |
| L 083766-701 | Cover, differential valve, 2" |
| L 083768-002 | Valve stem assembly, 1¼", 1½", differential valve, (bronze) |
| L 083769-002 | Valve stem assembly, 1¼", 1½", differential valve, (iron) |
| L 083771-002 | Diaphragm, 1½", 2", differential valve |
| L 083771-003 | Diaphragm Molded, 1 1/4"-2" (Alt-PN 1000624) |
| L 083772-002 | Diaphragm retainer, 1¼", 2", differential valve |
| L 083773-000 | Spring retainer, 1¼", 2", differential valve |
| L 083774-002 | Diaphragm screw, 1¼", 2", differential valve |
| L 083775-000 | Spring, 1¼", 2", differential valve |
| L 083925-701 | Differential valve, 2”, complete |
| L 083926-701 | Body, differential valve, 2'' |
| L 083927-002 | Valve stem assembly, 2", differential valve (bronze) |
| L 083927-003 | Valve stem assembly, 2", differential valve, (iron) |
| L 083927-010 | Valve stem assembly, 2" soft seat differential valve |
| L 083927-011 | Valve plug, 2” soft seat differential valve |
| L 083927-012 | Seat retainer, 2” soft seat differential valve |
| L 083927-013 | Valve stem, threaded, 2" soft seat differential valve |
| L 083946-006 | Diaphragm complete, 1½", differential valve, LPG |
| L 083946-007 | Order L 083946-006 |
| L 083947-003 | Diaphragm complete, 2", differential valve, LPG |
| L 083947-010 | Diaphragm complete, 2'', differential valve w/soft seat |
| L 084009-002 | Lower valve housing complete, 1½", vapor release, NH3 |
| L 084010-001 | Lower valve housing complete, 2", vapor release, NH3 |
| L 084192-006 | Driver, fork (long) |
| L 084435-000 | Mounting studs, 304, 400/800 series register, stainless steel |
| L 084553-003 | Gear train, 43.5R, Ethanol, 1 US gallon, Std Spdl, 1" |
| L 084553-004 | Gear train, 11.6R, Ethanol, 1 US gallon |
| L 084553-340 | Ethanol Kit (43.5R) |
| L 084553-341 | Ethanol Kit (11.6R) |
| L 084802-702 | Main case cover 2", no/ATC |
| L 084804-702 | Main case housing, 2", Type 4D |
| L 084806-000 | Main case gasket, 2" |
| L 084807-701 | Vapor release & strainer assembly, 2", complete |
| L 084808-701 | Vapor eliminator cover w/float valve & float, 2 |
| L 084810-701 | Body, vapor release & strainer |
| L 084811-701 | Strainer cover, 2”, w/ATC thermowell |
| L 084812-702 | Strainer cover, 2”, w/o thermowell |
| L 084813-702 | Inlet check valve w/soft seat, 2" |
| L 084813-710 | Inlet check valve w/soft seat, 2", NH3 |
| L 084814-003 | Flange body, 2", check valve |
| L 084815-000 | Inlet check valve bearing support assembly, 2" |
| L 084815-011 | Inlet check valve bearing support assembly, 2", NH3 |
| L 084815-050 | Center bearing assembly, 2" |
| L 084815-053 | Center bearing assembly, 2", NH3 |
| L 084816-001 | Order L 084816-002 |
| L 084816-002 | Strap reinforced center bearing support, 2", check valve |
| L 084817-000 | Retaining ring, spiral, 2", check valve |
| L 084818-000 | Gasket flange (square cut), 2" |
| L 084823-000 | Connecting tube, (3/8") for 2" differential valve |
| L 084823-001 | Connecting tube, (3/8") for 1½" differential valve |
| L 084825-000 | Elbow (male) 3/8", flared tube |
| L 084825-001 | Elbow, 3/8” NPT x 3/8” SAE |
| L 084826-000 | Connection (male), 3/8", flared tube |
| L 084826-050 | Bushing, 3/4" x 1/4" |
| L 084826-100 | Male connector, 1/8" NPT, 1/4" JIC |
| L 084826-101 | Street tee, 3/4", high pressure |
| L 084827-010 | Pipe adapter, 1/4-1/4, ¾” ATC |
| L 084828-000 | Vapor return, check valve, 1½" |
| L 084850-003 | O-ring, 2” thermostat bellows, NH3 |
| L 084888-000 | Spring, push rod 1¼", 1½", 2" ATC |
| L 084888-001 | Spring, push rod, 3/4", 1" ATC |
| L 084890-004 | Register drive bracket complete (upper) |
| L 084907-001 | Gear & shaft assembly, 41/35, 1¼",1½", 2" ATC |
| L 084909-003 | Temperature compensator, spider with shaft |
| L 084910-001 | Order L 084910-003 |
| L 084910-003 | Arm complete, offset spider, 1¼", 1½", 2" ATC |
| L 084910-004 | Arm complete, offset spider, LPM-100, 3/4", 1" ATC |
| L 084913-000 | Lower drive bracket complete, 3/4", 1" ATC |
| L 084913-002 | Lower drive bracket complete, 1¼", 1½", 2" ATC |
| L 084914-000 | Drive bracket w/bushings, 1¼", 1½", 2" ATC |
| L 084916-000 | Ratchet wheel assembly w/arms, 3/4", 1" ATC |
| L 084916-001 | Ratchet wheel assembly w/arms, 1¼", 1½", 2" ATC |
| L 084917-000 | Ratchet wheel/shaft assembly, 3/4", 1" ATC |
| L 084917-001 | Ratchet wheel/shaft assembly, 1¼", 1½", 2" ATC |
| L 084921-003 | Adapter housing, ATC 1¼", 1½", 2" ATC |
| L 084935-000 | Gear train-9.375, 1 US gallons, 1½", NH3 |
| L 084935-002 | Gear train, 25.418 ratio, 1 liter, 1½", NH3 |
| L 084981-000 | Gear train, 9.375 ratio, LPG, 1 US gallon, 1½" |
| L 084982-702 | Vapor Eliminator 1 1/2" Complete |
| L 084983-250 | Check valve w/soft seat, 1¼" |
| L 084983-704 | Check valve w/soft seat, 1½" |
| L 084983-713 | Check valve w/ soft seat, 1½" , NH3 |
| L 084984-005 | Flange body, 1½" |
| L 084984-100 | Flange body, 1¼" |
| L 084985-701 | Differential Valve Complete, LPM-150 |
| L 084985-703 | Differential Valve Complete, LPM-150 NH3 |
| L 085006-000 | Non-swivel adapter |
| L 085150-001 | Gear train o-ring, (neoprene) |
| L 085965-001 | Tubing, strainer support |
| L 086055-000 | Ratchet arm sets (1, 2, 33, 44) |
| L 086057-001 | Ratchet arm assembly, #1 |
| L 086063-000 | Spring, ratchet arm, all ATC's |
| L 086064-001 | Ratchet arm assembly, all ATC's, #2 |
| L 086071-000 | Retaining ring, 1/2" extension |
| L 086554-001 | Gear and drive shaft complete (41 tooth) |
| L 086602-005 | Temperature compensator adapter, w/upper drive bracket, 1¼", 1½", 2" |
| L 086602-010 | Temperature compensator adapter, w/o upper drive bracket, 1¼", 1½", 2" |
| L 086602-705 | Order L 086602-005 |
| L 086609-000 | Plate, idler gear retainer, 1¼", 1½", 2" ATC |
| L 086611-001 | Push rod, 1¼", 1½", 2" ATC |
| L 086612-000 | Swivel block assembly, all ATC's |
| L 086637-001 | Ratchet arm assembly, all ATC's, #33 |
| L 086639-001 | Ratchet arm assembly, all ATC's, #44 |
| L 086645-000 | Spring, offset spider, 1¼", 1½", 2" ATC |
| L 086646-000 | Thermostat bellows, all ATC's |
| L 086647-001 | Thermostat cover 1¼", 1½", 2" ATC |
| L 086648-000 | Thermostat pin, 1¼", 1½", 2" ATC |
| L 086648-006 | Thermostat pin, 3/4", 1" ATC |
| L 086649-003 | Lever arm assembly & mounting plate, all ATC's |
| L 086661-001 | Lever arm lock pin, all ATC's |
| L 086665-000 | Lever arm cover mounting plate, all ATC's |
| L 086666-702 | Thermowell only, uni-piece (no cover see 083732-000) |
| L 086698-702 | Connector, LPM-200, 2" |
| L 086702-300 | Temp Compensator w/o upper drive bracket (gallon) |
| L 086702-301 | Temperature compensator, LPM-200, gallons |
| L 086702-302 | Temperature compensator, LPM-200, liters |
| L 086702-303 | Temp Compensator w/o upper drive bracket (liter) |
| L 086702-304 | Temp Compensator 1 1/4"-1-1/2" w/ Gear plate |
| L 086702-305 | Temp Compensator 1 1/4"-1 1/2" w/ Upper Drive Bracket, Gal |
| L 086704-701 | Main case cover w/ATC, LPM-200, 2" |
| L 086711-000 | Spacer, 2" |
| L 086797-001 | Lower valve housing, complete, 1½" A/R |
| L 086798-001 | Lower valve housing, complete, 2" A/R |
| L 086808-000 | Bracket assembly (upper) w/bushing |
| L 086973-000 | Order L 041401-000 |
| L 087173-710 | Main case cover, 3/4" |
| L 087179-001 | Thermostat cover, 3/4", 1" ATC |
| L 087179-710 | Flange, 3/4", differential valve |
| L 087180-710 | Flange, 3/4", in/out |
| L 087180-711 | Flange, in/out, 1" |
| L 087180-712 | Mono Block-Inlet 3 - 1/4" NPT Holes (LPM-102 Meter) |
| L 087180-713 | Mono Block-Outlet 1 - 3/4" NPT Hole (LPM-102 Meter) |
| L 087180-714 | Mono Block - Inlet 2 - 1/4" NPT Holes (LPM-102 Meter) |
| L 087180-715 | Mono Block- Outlet 2 - 3/4" NPT Holes (LPM-102 Meter) |
| L 087181-000 | Strainer retainer assembly |
| L 087186-000 | Retainer plate, bottom |
| L 087188-001 | Valve assembly w/float, 3/4", 1", vapor eliminator, Type A |
| L 087188-010 | Valve assembly w/float, 3/4", 1", vapor eliminator, Type B |
| L 087189-001 | Float only, 3/4", 1", vapor eliminator |
| L 087190-000 | Vapor return valve only, 3/4", 1", vapor eliminator, Type A |
| L 087190-010 | Vapor return valve only, 3/4", 1" Type B |
| L 087190-102 | Vapor Elimination Upgrade Kit |
| L 087193-710 | Vapor eliminator cover, 3/4" |
| L 087195-000 | 90ª Elbow, 1/8" NPT X 1/4" JIC, 3/4" |
| L 087196-001 | Tube assembly, vapor release , LPM-102, 1” |
| L 087196-010 | Tube assembly, vapor release , LPM-100 , 3/4” |
| L 087198-000 | Nut, flared, 1/4" tube |
| L 087201-000 | Main case housing, LPM-101 |
| L 087774-001 | Gear train, 3.75 ratio, 1 US gallon, 2", NH3 |
| L 087774-003 | Gear train, 9.93 ratio, LPG, 1 liter, 2", NH3 |
| L 087948-004 | Strainer, 1¼", 1½", 16 mesh |
| L 088286-003 | Spacer, spring retainer, all ATC's |
| L 088524-000 | Screw, 10-32 x 3/8", fillister head, 304 stainless steel |
| L 088524-010 | Screw, 10-32 x 3/8", socket cap |
| L 088589-001 | Driver fork, (short) w/pin 400/800 series |
| L 088638-000 | Screw, filister head, 1/4-20 x 1/2” |
| L 088721-000 | Lock washer, 1/4", steel |
| L 088796-000 | Socket, set screw, 8-32 x 5/16" |
| L 088796-001 | Socket, set screw, 6-32 x 5/16" |
| L 089073-000 | Screw, fillister head, steel plated, 10-32 x 1¼" |
| L 089274-002 | Main valve assembly (bronze/neoprene) |
| L 089274-004 | Main valve assembly, complete (aluminum/neoprene) |
| L 089274-006 | Main valve assembly, complete (bronze/Buna-N) |
| L 089274-010 | Main valve assembly, complete (bronze/Viton) |
| L 090027-002 | LPM-101, with 157 totalizer, 1 liter |
| L 090027-011 | LPM-101, with 157 totalizer, 10 liters |
| L 090027-050 | LPM-101, w/o Star Driver, w/trac, 1 liter |
| L 090027-051 | LPM-101, to gearplate only, w/Trac, gallon |
| L 090027-101 | LPM-101, with 157 totalizer, 1 US gallon |
| L 090027-102 | LPM-101, with non-printing reset register, 1 US gallon |
| L 090027-103 | LPM-101, with non-printing reset register, 1 liter |
| L 090027-206 | LPM-101, with Veeder-Root 10:1 pulsar, 1 US gallon |
| L 090027-207 | LPM-101, with Veeder-Root 100:1 pulsar, 1 US gallon |
| L 090027-208 | LPM-101, with Veeder-Root 10:1 pulsar, 1 liter |
| L 090027-209 | LPM-101, with Veeder-Root 100:1 pulsar, 1 liter |
| L 090027-340 | LPM-101, Ethanol, Gal, no star driver, 43.5 GT |
| L 090028-001 | LPM-102, with 157 totalizer, 1 US gallon |
| L 090028-010 | LPM-102, with 157 totalizer, 1 liter |
| L 090028-011 | LPM-102, with 157 totalizer, 10 liters |
| L 090028-040 | LPM-102, no register, no gear plate, no tower, 1 US gallon |
| L 090028-050 | LPM-102, no register, no gear plate, no tower, 1 liter |
| L 090028-051 | LPM-102, no register, with gear plate and tower, 1 US gallon |
| L 090028-052 | LPM-102, no register, no gear plate, with tower, 1 US gallon |
| L 090028-053 | LPM-102, no register, with gear plate and tower, 1 liter |
| L 090028-054 | LPM-102, no register, no gear plate, with tower, 1 liter |
| L 090028-101 | LPM-102, with non-printing reset register, 1 US gallon |
| L 090028-102 | LPM-102, with printing reset register, 1 US gallon |
| L 090028-103 | LPM-102, with non-printing reset register, 1 liter |
| L 090028-104 | LPM-102, with printing reset register, 1 liter |
| L 090028-105 | LPM-102 with ATC, with non-printing reset register, 1 US gallon |
| L 090028-106 | LPM-102 with ATC, with printing reset register, 1 US gallon |
| L 090028-107 | LPM-102 with ATC, with non-printing reset register, 1 liter |
| L 090028-108 | LPM-102, with ATC, with non-printing reset register, 1 liter, 116.875 GT |
| L 090028-109 | LPM-102 with ATC, no register, with gear plate, 1 US gallon |
| L 090028-110 | LPM-102 with ATC, no register, with gear plate, 1 liter |
| L 090028-111 | LPM-102, with non-printing register, 10 liters, 116.875 gear train |
| L 090028-201 | LPM-102 with pulser gear plate and Quick-Vent, 1 liter |
| L 090028-206 | LPM-102, with Veeder-Root 10:1 pulsar, 1 US gallon |
| L 090028-207 | LPM-102, with Veeder-Root 100:1 pulsar, 1 US gallon |
| L 090028-208 | LPM-102, with Veeder-Root 10:1 pulsar, 1 liter |
| L 090028-209 | LPM-102, with Veeder-Root 100:1 pulsar, 1 liter |
| L 090028-601 | LPM-102, with non-printing register, 10:1 pulsar, 1 US gallon |
| L 090028-602 | LPM-102, with non-printing register, 100:1 pulsar, 1 US gallon |
| L 090028-603 | LPM-102, with non-printing register, 10:1 pulsar, 1 liter |
| L 090028-604 | LPM-102, with non-printing register, 100:1 pulsar, 1 liter |
| L 090028-611 | LPM-102, with ATC, with non-printing register, 10:1 pulsar, 1 US gallon |
| L 090041-040 | LPM-150, no register, no gear plate, 1 US gallon |
| L 090041-050 | LPM-150, no register, no gear plate, 1 liter |
| L 090041-051 | LPM-150, no register, with gear plate, 1 US gallon |
| L 090041-053 | LPM-150, no register, with gear plate, 1 liter |
| L 090041-101 | LPM-150, with non-printing reset register, 1 US gallon |
| L 090041-102 | LPM-150, with printing reset register, 1 US gallon |
| L 090041-103 | LPM-150, with non-printing reset register, 1 liter |
| L 090041-104 | LPM-150, with printing reset register, 1 liter |
| L 090042-000 | LPM-200, with non-printing reset register, 1 US gallon, no ve, no dv |
| L 090042-040 | LPM-200, no register, no gear plate, 1 US gallon |
| L 090042-041 | LPM-200, no gear plate, NH3, 1 US gallon |
| L 090042-050 | LPM-200, no register, no gear plate, 1 liter |
| L 090042-051 | LPM-200, no register, with gear plate, 1 US gallon |
| L 090042-053 | LPM-200, no register, with gear plate, 1 liter |
| L 090042-101 | LPM-200, with non-printing reset register, 1 US gallon |
| L 090042-102 | LPM-200, with printing reset register, 1 US gallon |
| L 090042-103 | LPM-200, with non-printing reset register, 1 liter |
| L 090042-103R | LPM-200, with non-printing reset register, 1 liter, Reverse |
| L 090042-104 | LPM-200, with printing reset register, 1 liter |
| L 090042-105 | LPM-200 with ATC, with non-printing reset register, 1 US gallon |
| L 090042-106 | LPM-200 with ATC, with printing reset register, 1 US gallon |
| L 090042-107 | LPM-200 with ATC, with non-printing reset register, 1 liter |
| L 090042-108 | LPM-200 with ATC, with printing reset register, 1 liter |
| L 090042-109 | LPM-200 with ATC, no register, with gear plate, 1 US gallon |
| L 090042-110 | LPM-200 with ATC, no register, with gear plate, 1 liter |
| L 090042-111 | LPM-200 with ATC, no register, with upper drive bracket, 1 US gallon |
| L 090042-112 | LPM-200 with ATC, no register, with upper drive bracket, 1 liter |
| L 090042-113 | LPM-200 with ATC Cover, no gear plate, register or bellows, 1 liter |
| L 100024-001 | Spring, 3/4" differential valve |
| L 100024-003 | Spring, complete, vapor eliminator |
| L 100025-002 | U-cup seal, gear train (Buna-N) |
| L 100025-004 | U-cup seal, gear train (Viton) |
| L 100025-005 | U-cup seal, gear train (Rulon) |
| L 100025-007 | U-cup seal, gear train (Teflon) |
| L 100025-008 | U-cup, differential valve, extra low friction, 3/4" |
| L 100025-101 | O-ring, differential valve, soft seat (Buna) 3/4" |
| L 100025-102 | O-ring, differential valve, soft seat (Viton) 3/4" |
| L 100025-109 | U-cup, differential valve, fluro carbin, 3/4" |
| L 100027-010 | Differential valve only, 3/4" sleeve |
| L 100028-011 | Differential valve kit, 3/4" soft seat |
| L 100028-050 | Differential valve seals kit for LTC, 3/4" |
| L 100059-025 | Cap screw, 1/4-28 x 3/4” |
| L 100060-010 | Screw, socket head, 1/4"-20 x 3/4" stainless steel |
| L 100060-011 | Screw, socket head, 1/4"-20 x 3/4", drilled |
| L 100061-100 | Cap screw, plated, 1/4-28 x 5/8" |
| L 100061-101 | Cap screw, plated, 1/4-28 x 5/8", drilled |
| L 100063-026 | Cap screw, plated, 5/16-18 x 1" |
| L 100067-027 | Cap screw, plated, 3/8-16 x 1" |
| L 100068-027 | Cap screw, plated, 3/8-16 x 1", drilled |
| L 100071-068 | Cap screw, plated, 7/16-14 x 3" |
| L 100072-001 | Screw, socket head, 3/8-16 x 3½", stainless steel |
| L 100075-003 | Drain plug, 1½" differential valve |
| L 100076-003 | Pipe plug, 1/2" |
| L 100121-009 | Lock washer, 1/4", split, stainless steel |
| L 100121-010 | Lock washer, plated, 5/16", split |
| L 100121-036 | Lock washer, plated #10, split |
| L 100122-007 | Lock washer, plated #10, internal |
| L 100123-100 | Lock washer, plated, 1/4", external |
| L 100138-003 | O-ring, gear train, (Buna-N) |
| L 100138-005 | O-ring, 1/16" x 11/16" ID, vapor release, neoprene |
| L 100138-006 | O-ring, 1/16" x 11/16" ID, vapor release |
| L 100138-012 | O-ring, gear train, (Viton) |
| L 100139-001 | O-ring, differential valve, 1½" |
| L 100139-004 | O-ring, 1½" N.S. strainer (Buna-N) |
| L 100139-005 | O-ring, thermowell, 2" |
| L 100139-006 | O-ring, seal, differential valve sleeve, 3/4" |
| L 100139-007 | Flange seal, 3/4" |
| L 100139-010 | Gasket, inlet check valve, 1½" |
| L 100139-012 | Gasket, vapor eliminator, 1/8" x 3-1/4" |
| L 100139-018 | Gasket, inlet check valve, 2" |
| L 100139-022 | Gasket, vapor eliminator flange, 1½" |
| L 100139-031 | O-ring, 2” inlet check valve & 1½" strainer, neoprene |
| L 100139-032 | Soft seal, inlet check valve, 2" |
| L 100139-038 | O-ring, strainer gasket, 2" (Buna-N) |
| L 100139-046 | O-ring, 2" differential valve, soft seat (Viton) |
| L 100139-100 | Seal kit, flanges, LPM-100 |
| L 100139-102 | Seal kit, flanges, LPM-102 & 1” meters |
| L 100146-003 | O-ring, soft seal, check valve, 1½" |
| L 100146-005 | O-ring, soft seal, check valve, 1½" , (Neoprene) |
| L 100147-901 | Cover, vapor release |
| L 100148-001 | Cover assembly 1¼", 1½", 2" vapor return |
| L 100160-011 | Piston, differential valve, complete |
| L 100160-040 | Piston, aluminum, 3/4" differential valve plug (aluminum) |
| L 100160-050 | Differential valve retainer, 3/4" (brass) |
| L 100237-001 | Bypass valve assembly |
| L 100322-001 | Caution tag, 2" vapor valve |
| L 100333-001 | Maint. pressure release screw and plate assembly |
| L 100334-001 | Link assembly, 1½" A/R valve |
| L 100370-003 | Roll pin, 1/16" x 3/8", steel |
| L 100370-004 | Roll pin, 1/16" x 1/2", steel |
| L 100370-007 | Roll pin, 3/32" x 3/8", stainless steel |
| L 100370-013 | Locating Pin, 1/4" X 9/16" stainless steel |
| L 100370-022 | Roll pin, 3/32" x 1/2" |
| L 100374-002 | Holder, disc seat, 2" check valve |
| L 100374-012 | Holder, disc seat, 2" check valve, NH3 |
| L 100423-002 | Holder, disc seat, 1½" check valve |
| L 100423-012 | Holder, disc seat, 1½" check valve, NH3 |
| L 100440-001 | Lock washer, plated, 3/8" split |
| L 100440-002 | Lock washer, hi-collar, plated, 3/8" split |
| L 100440-003 | Lock washer, hi-collar, plated, 5/16" split |
| L 100535-001 | VR pulsar, 10:1 reed switch, reversible, AC/DC |
| L 100535-002 | VR pulsar, 100:1 solid state, reversible, 10-15VDC |
| L 100553-201 | Register mask (lens) 600 series register |
| L 100683-001 | Strainer assembly, 3/4" Type 4D |
| L 100700-001 | Register adapter tower, Neptune type w/o ATC (tall) |
| L 100711-001 | Coupling, gear train shaft, 106 register |
| L 100711-004 | Coupling, gear train shaft, 600 register |
| L 100729-001 | Adapter Type S 600 Series register |
| L 100795-003 | Cap screw, hex head, 7/16"-14 x 1-3/8" |
| L 100840-000 | Pulsar mounting kit, with tower and adapter plate |
| L 100840-001 | Pulsar w/adapter, 10:1, LPM-101 & LPM-102 |
| L 100840-002 | Pulsar w/adapter, 100:1, LPM-101 & LPM-102 |
| L 100877-001 | Stud, anti-reset, 600 register |
| L 100895-001 | Check valve disc assembly, 1½" |
| L 100895-011 | Check valve disc assembly, 1½", NH3 |
| L 100895-050 | Center bearing assembly, 1½" |
| L 100895-053 | Center bearing assembly, 1½", NH3 |
| L 100896-001 | Shaft, valve stem, 1½", 2" check valve |
| L 100896-011 | Shaft, valve stem, 1½", 2" check valve, NH3 |
| L 100897-001 | Retainer disc, 1½" check valve |
| L 100897-011 | Retainer disc, 1½" check valve, NH3 |
| L 100898-001 | Retainer disc, 2" |
| L 100898-011 | Retainer disc, 2", NH3 |
| L 100899-001 | Bearing, grooved, 1½" check valve |
| L 100899-003 | Bearing, grooved, 1½" check valve, NH3 |
| L 100899-010 | Bearing, grooved, 2" check valve |
| L 100899-011 | Bearing, grooved, 2" check valve, NH3 |
| L 101047-001 | Housing assembly, 3/4", 1", ATC |
| L 101048-001 | Thermostat housing 3/4", 1", ATC |
| L 101052-001 | Adapter mounting ring, 3/4", ATC |
| L 101055-001 | Plate drive assembly, 3/4", 1", ATC |
| L 101059-001 | Push rod, 3/4", 1", ATC |
| L 101060-001 | Offset arm support, plate, 3/4", 1" |
| L 101065-001 | Connecting tube, 3/4" ATC only |
| L 101080-001 | Order L 101080-005 |
| L 101080-002 | Order L 101080-005 |
| L 101080-005 | Automatic temp compensator, complete, 3/4" & 1" meters, no adapter plate |
| L 101080-006 | Automatic temp compensator, complete, 3/4" & 1" meters, w/VR adapter plate |
| L 101433-702 | Strainer, 1 1/2", 40 mesh, new style, 4D |
| L 101433-703 | Strainer, 1½", 60 mesh, new style, 4D |
| L 101433-704 | Strainer, 1½", 80 mesh, new style, 4D |
| L 101462-002 | Strainer, 2", 40 mesh, new style |
| L 101462-003 | Strainer, 2", 60 mesh, new style |
| L 101462-004 | Strainer, 2", 80 mesh, new style |
| L 101462-101 | Strainer Magnet, LPM-150 & LPM-200 |
| L 101738-001 | use 101738-002 |
| L 101738-002 | Strainer, 1", 120 mesh, new style |
| L 101738-101 | Magnet, strainer |
| L 101738-200 | Strainer/Differential Valve Puller kit, 3/4" meter |
| L 101748-001 | Order L 042075-101 |
| L 101753-001 | Gasket Kit for 1 1/4", 1 1/2" 4D meters |
| L 310300-329 | Spring Anti Top FR |
| L 310300-330 | Spring Reset |
| L 310300-331 | Spring Detent |
| L 312020-747 | Adapter Kit, Neptune 3/4-1in. VR Reg. |
| L 312020-906 | Pulsar Kit, Veeder-Root, 1:1 |
| L 324633-006 | Totalizer group, Veeder-Root register, 8W (7W+1B) |
| L 324695-002 | Crystal (lens), Veeder-Root register, liters/1 |
| L 324695-012 | Crystal (lens), Veeder-Root register, liters/10ths |
| L 324695-015 | Crystal (lens), Veeder-Root register, gallons/10ths |
| L 324695-060 | Crystal (lens), Veeder-Root register, litros/10ths |
| L 400013-901 | Body, vapor eliminator, 150 lb. flange |
| L 400013-903 | Housing, differential valve, 150 lb. flange |
| L 400025-001 | Strainer cover, LPM-102 |
| L 400025-002 | Strainer cover, LPM-102, tapped |
| L 400027-001 | Main case housing, LPM-102 |
| L 400070-703 | Differential valve, VE2, 1½", 150 lb. flange |
| L 400070-704 | Differential valve, VE2, 2", 150 lb. flange |
| L 400070-705 | Differential valve, VE2, 2", 150 lb. flange NH3 |
| L 400076-703 | Vapor eliminator, VE2, 150 lb. flange |
| L 400076-706 | Vapor eliminator, VE2, 150 lb. flange, less vapor check valve |
| L 400076-707 | Vapor eliminator, VE2, 150 lb. flange, less vapor check valve NH3 |
| L 788700-002 | Order L 788700-036 |
| L 788700-003 | Order L 788700-703 |
| L 788700-036 | Veeder-Root register, non-printing, US gallons/10ths |
| L 788700-703 | Veeder-Root register, non-printing, Liters/10ths |
| L 789002-002 | Use 789002-705 |
| L 789002-003 | Use 789002-705 |
| L 789002-705 | Veeder-Root register, printing |
| L 801668-001 | Register cover box, complete, 157 style |
| L 801669-001 | Housing, register cover, complete |
| L 801670-001 | Register cover, threaded complete |
| L 886100-002 | Gear plate adapter, Neptune 3/4" & 1" to Veeder-Root (short shaft) |
| L 886100-003 | Gear plate adapter,Ringless, Neptune 3/4" & 1" to Veeder-Root (long shaft w/fork) |
| L 886100-004 | Gear plate adapter, Neptune 3/4" & 1" to Veeder-Root (long shaft w/roll pin) |
| L 886101-001 | VRA-101 gear plate adapter & calibrator |
| L 886105-001 | Gear plate adapter 3/4", 1" ATC to Veeder-Root |
| L 886112-000 | Input shaft gear assembly |
| L 886112-001 | S-shaft, gear assembly |
| L 886112-002 | Input shaft, VRA-105 assembly |
| L 886112-003 | Input shaft, (long) with roll pin assembly |
| L 886112-004 | Input shaft, 41 tooth gear assembly, VRA-205 |
| L 886112-005 | Input shaft, short fork assembly, VRA-100 |
| L 886112-006 | S-shaft, gear assembly |
| L 886113-010 | Gear plate, complete, for pulsar |
| L 886115-000 | R-shaft, gear assembly |
| L 886116-000 | R-shaft, gear assembly, VRA-100 |
| L 886116-002 | Output shaft, bevel gear assembly |
| L 886116-010 | Output shaft, w/spur gear assembly |
| L 886116-011 | Bevel gear, w/clutch |
| L 886116-012 | Shaft, output, w/spur gear assembly |
| L 886117-000 | Idler shaft, gear assembly |
| L 886121-000 | Washer shim, 3/16" x 3/8" x .010 |
| L 886122-000 | Washer shim, 1/4" x 1/2" x .005 |
| L 886123-000 | Washer shim, 1/4" x 1/2" x .028 |
| L 886131-000 | Retaining ring, 3/16" external |
| L 886132-000 | Retaining ring, 1/4" external |
| L 886150-000 | Register adapter tower, LTC |
| L 886201-001 | Gear plate, Neptune/LTC 1¼", 2", w/o ATC |
| L 886205-001 | Gear plate, neptune/LTC 1¼", 2", ATC |
Search it in our catalog, add it to a quote list, and our technical sales team will reply with pricing and availability.
Search Liqua-Tech parts